MP-4S (MP-10S) COMPLETE EMULSION SYSTEM
380-460V/50-60HZ 6,000 (15,000)GPH EMULSION

MILLING SKID
  1. 50HP MP-4S(150HP MP-10S) COLLOID MILL UNITS
  2. 5HP 2.5" ASPHALT GEAR PUMP (10HP 3" PUMP)
  3. 2" 3-WAY (3") ASPHALT VALVE
  4. WELDED STEEL 2" (3") ASPHALT LINES
  5. 1.5X1X6 (1.5X1X8) GRP FIBERGLASS SOLUTION PUMP WITH 5HP (15HP), 3600RPM, TEFC MOTOR
  6. 1.5" (2") 3-WAY PROPORTIONING SOLUTION VALVE
  7. CHEMICAL RESISTANT SOLUTION LINES
  8. 3 MANUAL TEMP GAUGES
  9. CONTROL PANEL WITH DISCONNECT
  10. 50HP MOTOR STARTER (150HP SOFT START)
  11. 5HP MOTOR (15HP) SOLUTION STARTER
  12. 5HP (10HP) ASPHALT AC SPEED CONTROLLER
  13. THREE DIGITAL TEMP GAUGES
  14. DIGITAL SOLUTION FLOW METER
  15. TWO START/STOP STATIONS
  16. FUSE BLOCK SETS
  17. POLYMER BLENDING PIPING AND FITTINGS
  18. SKID MOUNTED
SOAP TANK SKID 88"X88"X234"
  1. TWO 1500 GAL FIBERGLASS SOLUTION TANKS
  2. ONE 200 GAL CONCENTRATE TANK
  3. 60KW (90-120KW) CIRCULATION HEATER
  4. TRANSFER PUMP
  5. 3 AGITATORS
  6. CPVC PIPING AND VALVES
  7. CONTROL PANEL WITH DISCONNECT
  8. FOUR MOTOR STARTERS
  9. TWO HEATER CONTACTORS
  10. TEMP CONTROLLER (DIGITAL)
  11. HEATER HIGH LIMIT SWITCH
  12. START/STOP SWITCHES
OPTIONS
  1. 3,000 - 5,000 GALLON FIELD INSTALLED TANKS
  2. GEN SET
  3. THIRD COMP SYSTEM
  4. HEAT EXCHANGER
  5. TRAILER

Back to Complete Systems Page